Custom Manufacturing

Ahead of Formnext 2026, UK additive manufacturing counts inventions more easily than installations

Founders, machine builders and university commercialisation staff set out the grants, equity terms, qualification costs and demand signals that decide whether British additive manufacturing expertise becomes repeat production.

Zora MarinkovicNovember 16, 20265 min read5 views
An illustrated workshop scene in which engineers move finished metal parts past a large additive manufacturing system, with a canal wharf visible in the background haze.

When Formnext opens in Frankfurt on 17 November, the United Kingdom will be the show's partner country. The billing recognises a research base with a strong patent record. The questions raised by the founders, machine builders and university commercialisation staff interviewed ahead of the event are narrower and harder: who ends up making the parts, and what would make a customer order them from Britain?

The historical reference point sits at Portsmouth. In 1803 the first set of block-making machines designed by Marc Isambard Brunel and built by Henry Maudslay began work at the dockyard; that May the Admiralty approved a second set for smaller blocks, and by 1808 45 machines were producing 130,000 pulley blocks a year for a navy that had been buying around 100,000 wooden blocks annually, with HMS Victory alone needing more than a thousand. The engineering gets the credit, but the customer's judgement mattered as much: the Navy knew which sizes it used, in what quantities, and could watch the first machines run before committing to the next set.

Patents measure invention, not output

The European Patent Office counted 1,925 international patent families in additive manufacturing originating in the UK between 2001 and 2020, against 1,938 for France. Additive Manufacturing UK's 2026 annual plan puts the domestic market at £515m-£740m in 2024, or 3% to 4.3% of the global total; the range itself reflects disagreement between market estimates. A patent family records an attempt to protect an invention. A market estimate can include machines bought from abroad. Neither says how much production happens in Britain.

Wayland Additive's chief executive Will Richardson points to metallurgy and materials science at Sheffield, Birmingham, Cambridge and Oxford, and to the Henry Royce Institute. His own business grew out of a team with electron-beam experience in semiconductors. In October a Calibur3 metal system left the company's Huddersfield facility for the University of Innsbruck, where researchers intend to study difficult materials, including those for high temperatures. Britain built and exported the machine; some of the knowledge of what it can do will now accumulate in Austria.

Funding ends where the customer's questions start

Jake Hand, co-founder of Exeter-based Rapid Fusion, says the company is profitable without R&D funding, but that Innovate UK support let it develop its own large-format systems, work with partners and share costs it would otherwise have carried alone. His criticism concerns the point at which a project succeeds: "they back a project, but not a business." A completed award can leave a working machine and evidence sufficient for the funder, while the buyer still asks whether it can make a particular mould, who trains the operator and what happens if a job stops halfway. Answering that for a single sale can absorb months. Innovate UK does allow later-stage work such as customer validation, initial tooling and production preparation, but not general business costs.

One answer exists at Kingston University, where a £450,000 Zeus robotic cell combining large-format printing with CNC milling was installed at the Roehampton Vale campus after a graduate, Raghav, pushed his employer and his former department to meet, according to operations manager Lesley Stigling. The university can bring work in-house and teach on the equipment; the manufacturer has a reference installation.

Equity, spin-outs and the first two installations

John Robinson, additive manufacturing research commercialisation manager at the University of Wolverhampton, incorporated a company in May 2017 that funded his PhD, and says he and the university filed several patent applications together in 2024. His current work includes multi-material devices that carry heat away from data-centre equipment. He recalls the former technology transfer office wanting 75% of the company; more recent talks with the enterprise team were about a 10% stake. National data point the same way: the Royal Academy of Engineering and Dealroom found the average non-cash stake taken by universities in UK deep-tech hardware spin-outs fell from 25% in 2015-19 to 14% in 2024-25, on partial 2025 data.

Louis Masters has cleared that first threshold. Hydra Manufacturing, a Leeds spin-out developing equipment for technical ceramics, announced £320,000 in equity led by SFC Capital in March, and about £577,000 including earlier grant support; he was then weighing a round of around £1m or more. Investors want to see two more installations, but developing the equipment and winning those customers draw on the same capital, and the location of early buyers will steer which applications come first. Germany, with its concentration of advanced ceramics manufacturers, is an obvious target.

Qualification costs and a thin installed base

Jason Hutt of Fastech sums up the incumbent advantage: "Casting's approved, isn't it?" An additively manufactured replacement may pass material tests and still need evidence specific to the machine, process and grade a given customer specified, and a second buyer may require much of that work again. The bill comes out of orders eventually won, and the arithmetic for fifty parts differs sharply from five thousand. The £38m Airbus-led DECSAM programme, with Renishaw, GKN Aerospace, Apex and the Manufacturing Technology Centre among partners, is one attempt to share it, through ground and flight demonstrators and qualification guidance, though a production contract remains a separate buyer decision.

Renishaw's Ben Deary and Ed Littlewood describe what reshoring reveals: a company can commission a machine and hire operators only to find that a supplier it once relied on has gone. Apex Additive Technologies, a Welsh specialist, develops process parameters and first parts so a customer can judge a proven process before taking production in-house. Richardson's version is blunter: "if you're not actually doing the doing, then you're not going to get good at it." A small installed base pushes training back onto each firm.

Demand signals and who buys

At a Manufacturing Technologies Association briefing at the House of Lords on 12 November, CloudNC chief operating officer Jason Bowes said it is "far, far easier to sell our technology in the U.S. than it is here." MTA chief executive James Selka argued investment is poised to enter British manufacturing but needs "a proper demand signal and co-investment from government", putting energy prices first among obstacles. Lord Harrington of Watford, chair of Make UK, recalled that sector deals worked where companies could put substantial sums alongside public money. He had chaired GeoPura, a hydrogen power business that was eventually sold to Canada's Ballard Power Systems, completing in August for £275m upfront.

Procurement is the lever Harrington identified when asked about fusion. In 2025 the UK Atomic Energy Authority commissioned two additive systems at its Central Support Facility: a Freemelt electron-beam machine for tungsten work and a Nikon SLM laser system supplied by Kingsbury Machine Tools with support from Additure. Separate maintenance projects drew in Laser Additive Solutions, The Welding Institute and WAAM3D. For a machine builder the question is when the next equipment specification is written; for a repair specialist, whether development leads to a maintenance contract. UKAEA's quarterly pipeline distinguishes possibilities, pre-commercial work and confirmed requirements.

AMufacture's Craig Pyser, who also chairs AMUK, estimates 95% to 98% of the company's work is now production, with defence the largest sector and designs revised every six to eight weeks. One customer that took a printer in-house kept ordering, then sold the machine back two years later. The parts stayed in Britain, made by a specialist able to spread costs across accounts. Pyser's measure of the Frankfurt show is simpler: an overseas company choosing Britain as its European base would count.