A carbon capture pilot at ArcelorMittal’s integrated steelworks in Gent, Belgium, has captured more than 90% of the carbon dioxide in blast furnace gas, completing the first phase of a trial involving Mitsubishi Heavy Industries (MHI), BHP and Mitsubishi Development Pty Ltd (MDP). The partners said the campaign generated operational and engineering data that will support an assessment of a potential full-scale installation at the Gent blast furnace.
The trial used MHI’s Advanced KM CDR Process at pilot scale. It ran for more than 4,500 hours of operational testing, according to the companies. The test was designed to examine whether the capture technology could work in a steelmaking environment where blast furnace off-gas carries dust, sulfur-containing compounds and other contaminants.
Full-scale potential
Assessments based on the phase 1 results indicate that applying the technology at full scale to the pre-combustion blast furnace off-gas could reduce CO2 intensity at the Gent site by up to 24%. If carbon capture were extended across multiple emission points at the steelmaking plant, the partners said the approach could support progress toward near-zero emissions intensity.
Phase 1 focused on a portion of the blast furnace off-gas. Blast furnace gas contains substantial concentrations of CO2 and carbon monoxide. In this phase, only CO2 was captured; the remaining carbon in the form of CO can be used elsewhere at the integrated site for power and heat generation, with CO2 released when that gas is combusted.
Next phase at hot strip mill
The second phase will broaden testing to other emission points in the steelmaking process. It will include capture from gases produced by the hot strip mill reheating furnace, a post-combustion source. That furnace is fired with gas and heats thick steel slabs to the temperature needed for rolling into thin sheets.
The reheating furnace uses a blend of by-product gases from steelmaking—coke oven gas, blast furnace off-gas and basic oxygen furnace gas—together with natural gas. The partners said phase 2 will assess MHI’s technology under a different and more dynamic flue-gas profile, adding data on how carbon capture can be integrated across multiple emission points or processes at an integrated steelworks. Results are expected to inform updated engineering and deployment studies for future full-scale applications.
Partner roles and comments
ArcelorMittal is facilitating the trial at its Gent site. MHI is supplying its proprietary Advanced KM CDR Process and leading carbon capture process engineering and technical evaluation. BHP and MDP, which supply high-quality steelmaking raw materials to ArcelorMittal’s European operations, are funding the trial.
Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the first stage had helped the partners better understand how carbon capture can be incorporated into existing steel plants. He described scaling up the needed technologies as the next step and said the blast furnace gas trial had provided important data.
Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, said completing more than 4,500 hours and demonstrating capture rates above 90% from blast furnace gas was an important milestone for applying the technology in steel. He said the campaign showed the process could operate under challenging conditions, including dust, sulfur-containing compounds and other impurities, while producing data for commercial-scale design assessment.
Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results were promising and demonstrated the abatement potential of the blast furnace and integrated steelmaking route. He noted that around 70% of global steel production comes from blast furnace steelmaking today and that the route is expected to remain important for decades, making emissions reduction from the process critical while alternative pathways are developed.
Tadashi Mizuno, managing director and CEO of MDP, said the phase 1 results strengthened confidence that carbon capture applied to blast furnace gas could provide a viable pathway for reducing emissions from the steel sector. He said energy efficiency improvements and high-quality raw materials will continue to matter in the near to medium term, while technologies such as CCUS could contribute significantly to longer-term decarbonization.
