Hardware & Tools

Bambu Teases Mixed Nozzle and Filament Sizes for H3C 3D Printer

A new teaser suggests the H3C may combine 0.2 mm and 0.4 mm nozzles, plus 1.75 mm and 2.85 mm filament, in a single job.

Hanna VirtanenNovember 1, 20265 min read4 views
A cutaway concept view of a multi-nozzle 3D printer producing a small watch-like assembly with rigid and soft parts.

Bambu is promoting its forthcoming H3C 3D printer through a series of feature teasers, and the latest points to mixed nozzle and filament sizes within one print. An image of a multi-component watch shows a 0.4 mm nozzle using 1.75 mm filament for the rigid case, a 0.2 mm nozzle using 1.75 mm filament for fine details, and a 0.4 mm nozzle using 2.85 mm filament for a soft strap that may be TPU.

The teaser implies two changes. First, Bambu appears to be preparing 2.85 mm filament support for soft, rubbery materials. Second, it suggests that 0.2 mm and 0.4 mm nozzles could be used in the same job. That differs from the limitation described for Bambu's current dual-nozzle machines, including the H2D and H2C and possibly the newer X2D, which have been restricted to one nozzle size per print. The teaser does not explain how software would manage the mixed setup, though the example appears intended for a multi-object job.

A follow-up video shows watch components being printed in place as a single part with multiple nozzle and filament sizes. It remains unclear whether the capability will reach existing compatible printers or be reserved for the new flagship H3C and the smaller P3C, which has not been formally announced. That distinction matters for owners hoping for a software-enabled upgrade rather than a reason to buy a new machine.