Electrical Equipment & Supplies

Electrical Safety Roundtable Publishes Consumer Guidance for Plug-In Solar Devices

New advice sets out compliance marking, pre-installation electrician checks and notification duties for households considering plug-in solar.

Mira KovalenkoNovember 5, 20265 min read2 views
A small plug-in solar panel sits at the edge of a balcony, its cable routed neatly to a protected outdoor socket.

The Electrical Safety Roundtable (ESR) has published new guidance aimed at helping consumers choose, install and use plug-in solar devices safely, warning that buying a unit from a supermarket, DIY store or online retailer is only part of the process.

The guidance sets out the checks and precautions the ESR says are needed for a system to be compliant, suitable and correctly installed, and is addressed both to consumers and to the organisations that advise them.

Product marking and sourcing

According to the ESR, a compliant plug-in solar device should meet the Plug-in Solar Device Interim Product Specification and be clearly marked, with a statement confirming compliance supplied alongside it. Labels should identify the manufacturer and the model or serial number, together with the unit's voltage, frequency, current, rated power, IP rating and protection class.

Consumers are advised to buy from reputable suppliers, to follow all supplied instructions, and never to modify the plug, cables, inverter, panels, connectors or other components provided with the device.

Installation and cable routing

The guidance recommends connecting the device to a nearby external socket-outlet that is suitably located and protected. Cables should not be trapped in doors or windows, because this can damage them, and poorly routed or secured cabling is described as a trip hazard and a further risk of damage.

Before purchasing, the ESR strongly recommends that consumers find a qualified and competent electrician to carry out the necessary checks on the household electrical system ahead of installing plug-in solar equipment.

Permissions and notification

Consumers are also urged to contact their insurer before buying a device. People living in flats or apartments may need approval from the building owner, while tenants must seek permission from their landlord. Managing agents, planning authorities and other interested parties should be informed where applicable.

Once installed, the Distribution Network Operator must be notified within 28 days, and the instructions supplied with a compliant system should explain how this is done.

A resource for advisers

The ESR presents the guidance as a resource for anyone supporting consumers who are considering plug-in solar. Letting agents and landlords can pass it on to tenants and residents to explain the permissions and safety checks that may apply, while organisations can use it to raise awareness and point consumers towards clear, consistent information. Electricians can share it with potential customers to show why checks by a qualified and competent electrician matter before installation.

Nick Hayler, Chair of the Electrical Safety in the Home group, said the organisation supports innovation that can help households adopt renewable energy and reduce their bills, but that this has to be done safely. He said consumers should follow the guidance and use a competent and qualified person to help ensure their plug-in solar device is suitable and installed correctly.