Custom Manufacturing

Hexagon launches HYPERSCAN SR wireless 3D scanner for on-site industrial inspection

The Swedish measurement technology company's new system pairs WiFi 6, swappable batteries and dynamic optical tracking to bring dimensional inspection to production floors and field locations.

Bianca RossiOctober 14, 20265 min read7 views
A wireless handheld 3D scanner and its separate optical tracking unit shown beside a welded metal machine frame in an industrial workshop.

Hexagon has introduced the HYPERSCAN SR, a fully wireless optical tracking 3D scanner aimed at industrial inspection in production environments, supplier facilities and field-service locations. The Swedish measurement technology company said the system was introduced on October 12, 2026, and combines WiFi 6 connectivity, swappable batteries and dynamic optical tracking to reduce the preparation required for dimensional inspection.

According to Hexagon, the scanner can be operated by inspection teams and field-service engineers without relying on a dedicated metrology specialist. It targets small- to medium-sized components, including welded machine frames, cast housings, tooling, fixtures and vehicle interiors, and is designed to enable measurements where components are located rather than requiring them to be moved to dedicated measurement rooms.

Wireless optical tracking for on-site inspection

HYPERSCAN SR uses dynamic optical tracking to maintain a common coordinate system between the scanner and the component being measured. Hexagon said this allows the system to compensate for movement and vibration during scanning, which can complicate dimensional inspection outside controlled environments.

Both the handheld scanner and its separate optical tracking unit incorporate wireless connectivity and battery power, eliminating the need for external wireless accessories or cables between the devices. The swappable batteries provide up to two hours of operation, according to the company.

The scanner weighs 1.3 kg excluding its battery and carries an IP50 rating. It supports scanning rates of up to four million points per second, with multiple modes for capturing surfaces, fine features, edges and holes. It uses blue laser scanning technology and offers resolution down to 0.03 mm.

Hexagon specifies a maximum tracking distance of 4.2 m, a tracking volume of 25.9 m³ and a recommended component size range of 0.1 to 6 m. Volumetric accuracy is given as 0.06 mm at tracking distances up to 3.2 m, increasing to 0.1 mm at the maximum 4.2 m distance. The system is calibrated in an ISO 17025 accredited laboratory, with measurement accuracy validated according to VDI/VDE 2634 Part 3.

“Dynamic tracking makes HYPERSCAN SR quick to deploy and simple enough for everyday operators to pick up and use,” said Darren Goh, Product Director for Handheld 3D Scanners at Hexagon. “Because it’s a fully wireless system, with WiFi 6 and battery power native to the device, teams can bring it into limited-access and power-limited areas that a larger, cabled setup can’t reach.”

Integrated inspection software and automation capabilities

The system includes Hexagon's HH Scan software, which supports scan data management, alignment, dimensional measurements and inspection reporting. Operators can compare captured geometry against nominal CAD models using 3D colour maps without requiring a separate software licence for these basic inspection functions.

HYPERSCAN SR also supports data export in STL, OBJ, PLY and other formats. Compatibility with Geomagic Control X and PolyWorks enables further inspection workflows, while Geomagic Design X supports reverse engineering and the creation of editable CAD models from scanned geometry. Hexagon's advanced Geomagic software packages are licensed separately.

An optional HYPERPROBE contact measurement accessory extends the system to features that are difficult to inspect optically. The scanner also supports Galaxy LEAP referencing, which uses common targets to align measurements captured from multiple tracking positions within a single coordinate system.

Beyond handheld inspection, the scanner can be integrated into robotic measurement systems using Hexagon's standardized integration kit. Hexagon said these capabilities can also support additive manufacturing workflows, including dimensional verification of 3D printed components against their original CAD models.

Expanding the HYPERSCAN range

HYPERSCAN SR joins the existing HYPERSCAN Ultra and HYPERSCAN Super systems as the most mobile model in Hexagon's optical tracking scanner range. While the SR captures up to four million points per second, the Ultra and Super offer rates of up to 8.3 million points per second. Their respective maximum tracking volumes are 50 m³ and 100 m³, making them suitable for larger components and more extensive inspection operations.

All three systems share dynamic tracking technology, common software workflows and support for robotic integration. Hexagon positions the SR primarily for portable inspection, while the Ultra and Super target broader production and automated measurement applications. The company said HYPERSCAN SR is available globally through Hexagon and its reseller network.

Hexagon previously expanded its handheld scanning portfolio with the ATLASCAN Pro, introduced in October 2025 for small and medium-sized manufacturers, R&D teams and educational institutions. In February 2025, Canadian 3D measurement specialist Creaform introduced Creaform.OS and the Creaform Metrology Suite, replacing its previous VXelements software environment.