Simulation can help engineers predict how materials and components will behave under different loading conditions before physical prototypes are built. According to Instron, the value of those predictions depends on how accurately the model represents the material, particularly when loading is rapid.
Andrea Incardona, an application engineer and product specialist at the high strain rate testing machine manufacturer, outlines how high strain rate testing can supply data for simulation, material selection and product development. The company’s article focuses on materials whose mechanical response changes as loading speed increases.
Strain-rate effects in crash models
A material characterized under quasi-static conditions may respond differently during a rapid impact or crash event, Instron notes. The article cites a 2025 study in the SAE International Journal of Materials and Manufacturing, ‘Influence of Strain Rate Effect on Mechanical and Crashworthiness Properties of CFRP Composite Structures.’ The study found that incorporating strain-rate-dependent material properties into crash simulations reduced discrepancies between simulated and experimental results. The discrepancy in peak acceleration fell by 6.5%, while mean acceleration and displacement discrepancies fell by 5.9% and 6.3%, respectively, according to the article.
Instron argues that the relevance of material data matters as much as the quantity available. If strength, stiffness, deformation mechanisms or failure behavior change as strain rate rises, a model based only on conventional data may not represent the conditions in a rapid event.
Testing across loading rates
Depending on the specimen, Instron says materials can be characterized from quasi-static conditions up to strain rates approaching 1,000/s, with the exact range depending on the material, specimen geometry and test method. Tests can last only 3 to 10 milliseconds, requiring data acquisition that can capture the material response over a very short period.
The article also points to material selection. Conventional properties such as strength and stiffness are important, but they do not necessarily show how a material will respond when loading becomes rapid. Two materials that appear comparable under conventional testing may behave differently under high strain rate conditions. Characterizing their dynamic behavior allows engineers to consider deformation, energy absorption and failure under loading conditions relevant to the application, especially when performance must be balanced against weight.
For automotive crash structures or aerospace components, Instron says understanding dynamic material behavior can inform both material selection and component design.
Data in the development process
High strain rate testing can form part of a development process in which material behavior is measured, incorporated into simulation, used to compare design options and then validated through physical testing. Instron says engineers can use dynamic data earlier in development to assess whether a material is suitable, refine a component design and understand how changes may affect performance.
Accurate data capture remains critical. Instron’s high strain rate testing systems support data acquisition at up to 200 kHz, according to the company, while digital image correlation can provide additional information about strain development across the specimen. Analysis tools can then support data processing and theoretical modeling.
The company frames the result as a more connected approach to product development, where physical testing provides evidence that can improve simulation, inform material selection and refine designs. The central claim is that material data is only as useful as its relevance to the conditions a component will face.
