Custom Manufacturing

IOT Says Light-Form 3D Prints Personalized Progressive Lenses in Seconds

The Spanish ophthalmic technology company reports that a single light exposure cures a complete lens and that the process is already in consumer products.

Elias NavarroNovember 3, 20265 min read2 views
A clear progressive lens is shown inside a compact curing chamber under a brief pulse of light, with precision optical equipment nearby.

Spanish ophthalmic technology company IOT says it is the first to 3D print personalized progressive lenses. Its Light-Form Technology forms a complete lens with a single flash of light in a few seconds, and IOT says lenses made this way are already on sale to consumers.

The process avoids layer-by-layer construction and skips the generating and polishing steps used in conventional surfacing. It is based on stabilized frontal photopolymerization: light cures the entire volume of the lens in one pass instead of shaping it gradually from a blank. The forming stage takes seconds. Finishing then includes recovering unused resin to limit waste, hardening the surface and mapping the lens.

Resource use and optical precision

IOT says the method is much lighter on resources than traditional lens production. Compared with conventional methods, it uses no water in manufacturing, needs 90% less energy and produces 76% less waste; the company says those figures cover the manufacturing stage only. IOT also argues that a new production method for personalized progressive lenses must precisely reproduce the intended optical design, not merely create a recognizable shape. It says Light-Form combines the design freedom of digital manufacturing with these demanding optical requirements, allowing additive manufacturing to produce prescription lenses at commercial optical quality. The company adds that this could open more options for future lens architectures and individualized solutions.

“Light-Form demonstrates how scientific research can change the way ophthalmic lenses are made,” said José Alonso, co-founder and CINO of IOT. He added that pairing optical precision with a new production method could help optical partners create personalized products, test new lens architectures and run more flexible manufacturing.

Rethinking the production chain

IOT presents the technology as a way to redesign the production chain, not just as a faster forming step. Larger installations could use several printing heads to increase output without taking up much floor space. Further ahead, the company sees compact machines making custom lenses inside optical stores, putting production next to the customer and reducing the need to hold stock.

“The value lies in rethinking the production workflow,” said Carolina Gago, COO of IOT. She said resin recovery and lower water and energy requirements address how resources are used, while compact equipment could support production closer to consumers. IOT says it is working to translate these capabilities into practical manufacturing options.

For optical laboratories, this could mean organizing capacity around local demand instead of relying only on centralized surfacing equipment. For wearers, IOT says the long-term benefit would be faster access to lenses made for them. The company says optical partners would still play the central role in vision correction and customer service.

Smart glasses and other additive approaches

IOT is also looking beyond conventional spectacles. One option under development is printing prescription optics directly onto waveguides and flat substrates used in smart glasses and augmented reality headsets, which the company says could make those devices thinner and lighter. IOT also suggests that custom optical shapes could eventually be useful in virtual reality.

Other projects in the 3D printing sector are pursuing similar goals. Luxexcel was an early example in prescription eyewear: conventional prescription lenses tend to require around 30 steps, large inventories and high wastage, while Luxexcel built lenses layer by layer in a material jetting process. Its platform could print single-vision, freeform and multifocal progressive designs, and the company also embedded waveguides into prescription lenses for smart glasses. Meta later acquired Luxexcel as part of its AR technology efforts.

More recently, the approach has moved into point-of-care contact lenses. A University of Waterloo team developed a system that 3D prints custom contact lenses in roughly 20 minutes, raising the prospect that a patient could be measured, have a lens designed and walk out wearing it after one clinic visit. The work earned a Gold Medal at the Shanghai International Exhibition of Inventions in June 2026.

These projects show additive manufacturing moving into optical production. IOT says its Light-Form personalized progressive lenses are already reaching consumers.