Metals & Alloys

Permanent-Magnet Stirring Targets the Bottlenecks in Recycled Aluminium Melting

Zmag America's zPMC-based MagStir, MagPump and Typhoon systems address furnace homogenisation, molten-metal circulation and light-scrap submergence, backed by installations at NZAS, Boyne Smelters, TST and Neuman Aluminium.

Hanna VirtanenNovember 10, 20265 min read3 views
Cross-section illustration of an aluminium melting furnace in which an external magnetic circuit drives a vortex that pulls shredded scrap and machining chips beneath the molten metal surface.

Aluminium casthouses are under pressure to raise their consumption of post-consumer recycled (PCR) metal without giving up melt quality, recovery rates or production efficiency. Lightweight scrap, machining chips and other low-density fractions are difficult to introduce into conventional melting furnaces, which makes efficient scrap feeding and submergence a practical limit on recycling performance. A second limit sits inside the bath itself: temperature and chemical composition must stay consistent throughout the molten metal if the cast product is to meet specification, so circulation and stirring equipment has to deliver heat transfer and metal movement without excessive interruption or metal loss. Zmag America, Ltd. has built a product line around that pair of problems, using permanent-magnet engineering rather than immersed rotating hardware.

Why immersed hardware is the weak point

Conventional mechanical pumps remain the default for molten-metal circulation, but their working parts sit inside the melt. According to Zmag's account of the problem, those immersed rotating components deteriorate through exposure to molten aluminium, through dross accumulation and through contact with refractory debris. The wear mechanism is structural rather than incidental: the same contact that moves the metal also consumes the equipment, which ties maintenance and process interruptions to the circulation duty itself.

zPMC and the "virtual impeller"

Zmag's technical foundation is the industrial application of magnets and magnetic circuits. The company traces its history to magnetic engineering and to the commercialisation of eddy-current separation, a technique used to recover non-ferrous metals from mixed material streams, before extending into molten-metal applications. Its patented zPMC (Zmag Permanent Magnetic Circuit) is the base technology for equipment that stirs, circulates and submerges material in molten aluminium. The distinction from conventional electromagnetic stirring arrangements is that the magnetic field moving the metal is generated by a permanent magnetic circuit. Zmag describes the resulting metal movement as a virtual impeller, because circulation is produced without an immersed mechanical impeller.

MagStir: homogenisation without contact

MagStir is a non-contact stirring system for aluminium melting and holding furnaces. It generates movement within the molten bath to homogenise temperature and alloy composition, and Zmag offers it in configurations for furnaces from 15 to 200 metric tons. Because no mechanical stirring element enters the melt, the system is pitched as a way for casthouses to improve circulation without adding moving parts to the molten-metal environment. Its installation record extends beyond the United States: New Zealand Aluminium Smelters fitted the technology in a casting furnace and later extended it to additional furnaces, and a technical case study published in 2017 reported improvements in temperature control during furnace preparation. A MagStir unit was also installed in 2019 at Rio Tinto-operated Boyne Smelters in Queensland, Australia.

MagPump: circulation from a standard pump well

MagPump carries the same approach into pumping and circulation. It is designed to fit a standard pump well without furnace modification, and unlike a mechanical pump it has no physical impeller; Zmag markets it as a nearly hands-free alternative with no consumable parts and minimal downtime. The TANDEM Division of US-based secondary aluminium producer TST Inc. in Fontana, California, ran a seven-week trial in which MagPump replaced an existing mechanical pump in a furnace used for aluminium production. The account describes smooth operation and reduced disturbance to the molten-metal surface, and plant management reported that the system avoided the splashing seen with conventional pumping as the furnace metal level fell during draining. The technology was presented at the TMS 2023 Annual Meeting and Exhibition, where side-well, multi-chamber furnace applications were discussed, including potential use for gas injection and scrap submergence alongside metal circulation.

Typhoon: pushing light scrap beneath the surface

Typhoon addresses scrap submergence and chip melting. Rather than letting lightweight scrap and machining chips remain on top of the bath, the system introduces them beneath the molten-metal surface; its magnetic circuit generates a vortex-like movement that draws material into the melt and supports heat exchange and recovery during remelting. Neuman Aluminium's Marktl facility in Austria incorporated a Typhoon chip-submergence unit into a furnace modernisation project aimed at expanding its ability to process low-density post-consumer scrap, including lightweight fractions with a bulk density of roughly 375 kg/m³ that had been difficult to charge and melt conventionally. Neuman had targeted one metric ton per hour while the same furnace continued to melt solid charge; in operation the system processed almost twice the planned scrap quantity within the expected time without disrupting normal furnace operations, with low operator involvement and, according to the company, no negative impact on melt or finished-product quality. The published technical account puts the Typhoon system at 5-15 kW including its air-cooling blower, with capacity to submerge up to five metric tons per hour of machining chips, and notes that vortex intensity can be adjusted to keep the bath moving when no scrap or alloying material is being charged.

Familiarity as the adoption barrier

In an August 2025 interview with AL Circle, Eishin Takahashi, president of Zmag America, named limited familiarity with the technology as one obstacle to wider adoption in the United States, observing that aluminium producers globally tend to be conservative and more comfortable with equipment and processes they already know. That framing shapes how the case evidence should be read: the installations described above are demonstrations at named plants, not a broad statistical record of performance across the industry.

A crowded, but not equivalent, supplier field

Furnace stirring, molten-metal circulation and scrap submergence are served by several established suppliers, though their products are not all direct equivalents to a permanent-magnet system. ABB supplies its AL-EMS electromagnetic stirring system for melting, holding and alloying furnaces and reports more than 430 installations; in April 2026 it announced a further order from Arconic for a fifth stirrer at the company's Hungarian casthouse, following earlier units at the same facility. Presezzi Extrusion Group, through its Melting Technology division, offers the L.E.C. (Low Energy Consumption) Stirrer for melting and holding furnaces alongside remelting and casthouse equipment. Pyrotek covers a wider spread of casthouse equipment, including electromagnetic pump systems and its LOTUSS (Low Turbulence Scrap Submergence) technology, which uses a circulation pump and refractory well to submerge lightweight scrap; its UK operations include EMP Technologies Ltd., involved in designing, selling and installing metal-melting and circulation systems built around electromagnetic pumps. Rockwell Automation sits in the adjacent industrial automation segment rather than offering a like-for-like permanent-magnet stirrer, with furnace and ladle-shop control work that includes a modernisation project for Mozal Aluminium's casthouse.

What the evidence does and does not settle

The direction of travel is clear from the material-handling side: as producers take on more difficult recycled feedstock, managing molten-metal movement without immersed mechanical components becomes a more relevant consideration. What the available record does not supply is a like-for-like comparison; no head-to-head figures against electromagnetic stirring or mechanical pumping on energy use, metal loss or recovery rates are given, so the choice between technologies remains a question of fit with furnace type, scrap mix and operating practice rather than a settled ranking. Zmag's own cited constraint, producer conservatism, suggests adoption will be driven by repeat installations at reference plants before it is driven by the technology's operating principle.