Instruments & Meters

SinceVision Launches SGI-N030W Wide-Spot Laser Displacement Sensor

The sensor combines an expanded laser spot, 50 kHz sampling and dual-head synchronisation for non-contact measurement on rough surfaces and in-line battery electrode inspection.

Lucian PetrescuNovember 17, 20265 min read2 views
A wide-spot laser displacement sensor head measures a moving battery electrode web on an industrial gantry, with a second sensor positioned below.

SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company says the sensor uses an expanded laser spot and optical triangulation to address measurement instability that can occur with conventional point-spot laser systems when surface finishes vary.

The SGI-N030W extends SinceVision's SGI Series laser displacement sensor portfolio and targets lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required. Conventional point-spot sensors concentrate reflected laser energy on a small area, according to the company, making readings sensitive to scratches, grain boundaries, brushed textures and matte finishes. Those features can produce signal variations that are interpreted as dimensional changes, potentially triggering false defect warnings and additional inspection.

Wide-spot averaging

The new sensor collects reflected light across a broader surface area. SinceVision says this averages local microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering. The company cites drawn metals, sandblasted surfaces and coated battery foils as materials that can benefit from the approach.

Specified performance and interfaces

The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies 0.05 µm repeatability when measuring a diffuse white target under static conditions, and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.

Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.

Battery electrode thickness

One principal application identified by SinceVision is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. The company says conventional offline inspection with contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode materials, while periodic spot measurements cannot provide continuous coverage across a production reel.

In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure their respective clearances to the material. A system controller combines those readings with the fixed mounting datum to calculate absolute electrode thickness in real time. SinceVision reports production trials demonstrating stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide longitudinal resolution for detecting local coating agglomerations, edge thinning and exposed substrate before cell winding.

Other target applications

The sensor is also intended for semiconductor manufacturing, where non-contact measurement is important for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement, and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.

In precision assembly, SinceVision says the sensor can monitor voice coil motors, linear actuators and micro-steppers. Its sampling rate supports capture of transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full measurement range. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.

Surface-related errors

Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The SGI-N030W's expanded optical spot is designed to average out those surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.