Tremec has built a running manual-transmission Chevrolet Corvette C8 development car, and a reviewer has sampled it on a private track outside Howell, Michigan. The vehicle is a one-off Peitz Performance race build using Tremec’s new manual transaxle, created to demonstrate that a third pedal can work in the mid-engine Corvette.
The C8 was already a major change for Chevrolet: it was the first Corvette with the engine behind the driver and the first offered exclusively with a dual-clutch automatic. According to the account, developing two transaxles—one manual and one automatic—for the mid-engine layout was not in General Motors’ budget. The reviewer suggests that executives chose the automatic because it could help the car win comparison tests against more expensive rivals, rather than satisfy a small group of manual enthusiasts.
Tremec, whose six-speed gearboxes have been used in GM performance models including the Blackwing cars and the discontinued Camaro, invited the reviewer and several potential customers to try its transmission range at Motorsports Gateway. The reviewer was given the keys to the Peitz car and told, in effect, not to hit anything. It is the only example of its kind.
The build is uncompromising. The interior has little finish, the shifter emerges where the C8 normally stores items and houses the automatic selector, and the cabin is fitted with a roll cage and full harness. The seating position offers almost no adjustment and was set for a taller driver. At 5 feet 7 inches, the reviewer found heel-and-toe downshifts awkward and could not brace easily in corners, so the car was not pushed to its limit on a green track.
Fitting the gearbox did not require a wholesale redesign. The tunnel was cut to install the clutch-pedal hardware, but the manual transaxle occupies the same location as the stock dual-clutch unit and needs no special mating hardware. The pedal box also has enough room for a clutch, and the reviewer found the footwell roomier than a previous-generation Camaro’s even with the extra pedal.
The driving experience differs from Tremec’s front-engine TR-6060 applications because the shifter is remotely mounted, with a cable running back to the gearbox. That makes the transaxle less precise and less mechanical in feel, according to the review; some drivers may prefer the smoother action, while others may miss the direct connection. Moving the engine forward or the shifter rearward would address the issue, but neither is practical in the C8 layout.
Cost is the larger obstacle. The reviewer says building a manual C8 with Tremec’s gearbox would rival a showroom-spec Z06, with the transmission alone priced at about $75,000. Tremec expects that figure to fall as volume rises. The company says OEMs are interested, not necessarily or exclusively General Motors, and that other automakers want a high-torque manual transaxle, though no customers have been named.
For now, the car described is a Tremec development vehicle and race build, not a showroom model. It shows that the packaging can be made to work, but also that cost—not fitment alone—is the central obstacle.
