Industrial Machinery

WITT to Bring MEM+ Gas Mixers and Safety Valves to FABTECH 2026

The Las Vegas exhibit will focus on precise gas mixing, stable dome pressure regulation and protection against backflow and excess pressure.

Priya RamanOctober 25, 20265 min read3 views
Stainless-steel gas mixing equipment, pressure regulators and safety valves connected in a clean conceptual industrial setting.

WITT Gas Controls plans to exhibit at FABTECH 2026, scheduled for October 21–23 at the Las Vegas Convention Center in Las Vegas, Nevada. At Booth S46114, the company will discuss its MEM+ gas mixers, dome pressure regulators and gas safety valves, with emphasis on precise mixing, stable pressure and system protection.

MEM+ mixing and control

The MEM+ series is designed to mix two or three non-flammable gases, including nitrogen, carbon dioxide and oxygen, across industrial applications. Electronically operated motorized proportional valves allow adjustments in 0.1 percent increments, and WITT says the target mixture can be reached in less than three seconds with accuracy better than ±1% absolute.

Seven interface options, including Ethernet, OPC UA and PROFINET, support integration with existing systems. Users can operate the mixers remotely through a PC, PLC or machine controller, or directly through a touchscreen interface. Pressure equalization compensates for supply pressure fluctuations, while continuous inlet pressure monitoring and pressure alarms are intended to support safe operation. An integrated buffer tank accommodates fluctuating flow rates. The units are housed in a splash-proof, brushed stainless steel enclosure and support maximum inlet pressures of 20 bar and maximum outlet pressures of 10 bar.

Pressure regulation and valve protection

WITT will also highlight dome pressure regulators with optimized pilot pressure regulators. The design is intended to maintain stable working pressure as flow rates and inlet pressures change, supporting consistent process performance and product quality. The improvements can be retrofitted to existing WITT dome pressure regulators without replacing the complete system.

The company will also present ULTRA non-return valves and ULTRAVENT safety relief valves. ULTRA non-return valves combine low opening pressures, tight sealing and minimal flow resistance to protect gas systems against unwanted backflow. ULTRAVENT safety relief valves are designed to protect against excessive pressure and respond to pressure increases as low as 5 mbar.