Packaging & Printing

Yangi adds undercut capability to dry-moulded fibre packaging platform

The dry-forming developer demonstrates snap-fit closures in moulded fibre with a coffee lid rated at 6 N removal force.

Elena MarchettiNovember 4, 20265 min read2 views
A moulded fibre coffee lid with a precision-formed undercut rim sits beside a matching fibre cup on a studio surface.

Yangi has extended its dry-forming platform for moulded fibre packaging with a new undercut feature, a capability the company says will help customers move components such as coffee lids from plastic to fibre.

Undercuts are the geometries that create snap-fit connections and secure closures in plastic packaging, holding a lid and container together in a reliable mechanical fit. Reproducing them in moulded fibre is technically difficult, and Yangi is showing the capability through a coffee lid.

A lid measured at 6 N

The lid uses a precision-engineered undercut that Yangi says gives a secure, consistent fit, with a measured removal force of 6 N. It was tested through 10 simulated coffee pours over 10 minutes and held a leak-tight seal and its structural integrity when exposed to hot beverage at 93°C.

Beyond lids, Yangi positions the undercut technology for fitted closures across a range of applications:

  • snack and takeaway containers;
  • dessert and ice cream tubs;
  • confectionery packaging;
  • dry and ambient food containers;
  • packaging for personal care products, cosmetics and consumer goods.

“Achieving this level of precision in dry-molded fiber requires advanced tooling and forming expertise,” said Carlo Semeraro, head of Commercial Partnerships at Yangi. He added that while the coffee lid shows current performance, the larger opportunity lies in applying the functionality across a wider set of packaging applications.

Built on Cellera and FiberIQ

The undercut capability sits on Cellera, Yangi's dry-forming platform built on its patented fibre formation system, FiberIQ. Unlike conventional wet moulding, the process forms fibre without a water-based forming step, which is expected to lower water and energy demand in producing renewable, fibre-based packaging. In the coffee lid application, Cellera's four-second production cycle is estimated to reach 300 lids per minute, and the platform is designed for high-volume, cost-competitive manufacturing by combining precise fibre distribution with advanced forming technology.

“The challenge has never been simply to replace plastic with fibre,” said Yangi CEO Johann Kaiser. “It's to make fibre perform at the level the market demands.” He said each new capability reinforces fibre's position as a competitive alternative by delivering the functionality, quality and industrial performance needed to drive the transition toward fibre-based packaging.

Summit demonstration

Yangi will display the undercut feature alongside other parts of its dry-moulded fibre range at the Sustainable Packaging Summit in Utrecht from 10 to 12 November 2026, at Stand 28 in the Networking Zone, where visitors can view the Cellera dry forming technology through an immersive VR experience.

The announcement follows Yangi's commissioning of its serial Cellera machine platform. Combining Cellera with the dry forming process is expected to reduce resource consumption and CO2 emissions by 70%–80% compared with conventional plastic alternatives. Separately, PulPac licensee Hébert Group has partnered with Andritz to scale up production of Dry Molded Fiber trays and lids, targeting water- and energy-efficient manufacturing from renewable or recycled fibres.